Turn a traced logo into machine-ready geometry: R2010 DXF with per-color layers, HPGL/PLT for vinyl plotters, G-code for CO₂ lasers & CNC routers, and a kiss-cut die-line with adjustable bleed — plus print-ready SVG, PDF & EPS. All offline.
The same trace becomes cut-ready geometry for CAD, plotters, lasers and sticker kiss-cutting — plus clean vector handoff for print.
One layer per extracted color, Y-up coordinate space, curves flattened to polyline segments. Opens cleanly in AutoCAD, LibreCAD, laser & CNC controllers.
Native plotter pen commands for vinyl cutters — Cricut, Cameo, Graphtec and Roland. Single-pass cutting paths straight from the trace.
Toolpath output for CO₂ lasers & CNC routers. Ready-to-run .nc / .gcode / .tap with clean, continuous cut paths.
A single closed outline around your artwork with an adjustable bleed offset — the exact silhouette for sticker kiss-cutting.
True vector PDF for print production and legacy EPS for print shops that still demand it. Crisp at any scale.
Clean, grouped, layered SVG that opens in Illustrator, CorelDRAW, Affinity, Figma and Inkscape — the source of truth for every other format.
Pick the output that matches your hardware. Every format is generated from the same traced vector, so geometry always matches.
| Format | Extension | Best for | Notes |
|---|---|---|---|
| DXF | .dxf | CAD / CNC / laser | R2010 · per-color layers · Y-up · polyline-flattened |
| HPGL | .plt / .hpgl | Vinyl plotters | Plotter pen commands · single-pass cutting |
| G-code | .nc / .gcode / .tap | CO₂ laser / CNC router | Continuous toolpath · ready to run |
| Die-line | .svg | Sticker kiss-cutting | Single closed outline · adjustable bleed |
| Print production | True vector · crisp at any scale | ||
| EPS | .eps | Legacy print shops | Legacy vector for older workflows |
| SVG | .svg | Pro-editor handoff | Layered · grouped · editable |
Drop a raster logo or open an existing SVG. Vecspine produces a clean traced vector with one shape per color — the source for every cut format.
Pick your format and, for die-lines, set the bleed offset. DXF writes one layer per color so you can cut each color separately.
Export DXF, HPGL, G-code or die-line in one click. Load the file into your cutter, plotter or controller and cut — no manual cleanup.
Yes. Vecspine exports R2010 DXF with one layer per extracted color, Y-up coordinate space, and all curves flattened to polyline segments the machines understand. It's been tested on vinyl cutters, CO₂ lasers, CNC routers and AutoCAD / LibreCAD.
Four cut formats plus vector handoff: DXF (R2010, per-color layers) for CAD/CNC, HPGL/PLT for vinyl plotters, G-code for CO₂ lasers & CNC routers, and a cut-contour die-line SVG with adjustable bleed — plus layered SVG, print PDF and legacy EPS.
A single closed outline around your artwork with an adjustable bleed offset, used for sticker kiss-cutting. Vecspine generates it from the traced artwork so your cutter follows the exact silhouette.
Yes. The DXF writes one layer per extracted color so you can toggle or cut each color separately. HPGL and G-code are single-path toolpaths suited to one-pass cutting.
Curves are flattened to dense polyline segments so every machine — including older plotters and controllers that only read LINE entities — cuts smooth shapes.
Trace once, then export DXF, HPGL, G-code, die-lines, SVG, PDF & EPS — offline, in one click.
